How a Bill Becomes a Law (2024)

The primary function of Congress, as the Legislative Branch of our government, is to create and modify laws. In addition, under the powers enumerated in the Constitution, Congress has authority over financial and budgetary policy by levying and collecting taxes, duties, imposts and excises, and, to pay the debts and provide for the common defense and general welfare of the United States.

Here is the legislative process, from introduction to enactment into law:

LEGISLATION IS INTRODUCED

Any member can introduce a piece of legislation.

House:
Legislation is handed to the clerk of the House or placed in the hopper.

Senate:
Members must gain recognition of the presiding officer to announce the introduction of a bill during the morning hour. If any senator objects, the introduction of the bill is postponed until the next day.

  • The bill is assigned a number. (e.g. HR 1 or S 1)
  • The bill is labeled with the sponsor's name.
  • The bill is sent to the Government Printing Office (GPO) and copies are made.
  • Senate bills can be jointly sponsored.
  • Members can cosponsor the piece of Legislation.
COMMITTEE ACTION

The bill is referred to the appropriate committee by the Speaker of the House or the presiding officer in the Senate. Most often, the actual referral decision is made by the House or Senate parliamentarian. Bills may be referred to more than one committee and it may be split so that parts are sent to different committees. The Speaker of the House may set time limits on committees. Bills are placed on the calendar of the committee to which they have been assigned. Failure to act on a bill is equivalent to killing it. Bills in the House can only be released from committee without a proper committee vote by a discharge petition signed by a majority of the House membership (218 members).

Committee Steps:

  • Comments about the bill's merit are requested by government agencies.
  • Bill can be assigned to subcommittee by Chairman.
  • Hearings may be held.
  • Subcommittees report their findings to the full committee.
  • Finally there is a vote by the full committee - the bill is "ordered to be reported."
  • A committee will hold a "mark-up" session during which it will make revisions and additions. If substantial amendments are made, the committee can order the introduction of a "clean bill" which will include the proposed amendments. This new bill will have a new number and will be sent to the floor while the old bill is discarded. The chamber must approve, change or reject all committee amendments before conducting a final passage vote.
  • After the bill is reported, the committee staff prepares a written report explaining why they favor the bill and why they wish to see their amendments, if any, adopted. Committee members who oppose a bill sometimes write a dissenting opinion in the report. The report is sent back to the whole chamber and is placed on the calendar.
  • In the House, most bills go to the Rules committee before reaching the floor. The committee adopts rules that will govern the procedures under which the bill will be considered by the House. A "closed rule" sets strict time limits on debate and forbids the introduction of amendments. These rules can have a major impact on whether the bill passes. The rules committee can be bypassed in three ways: 1) members can move rules to be suspended (requires 2/3 vote)2) a discharge petition can be filed 3) the House can use a Calendar Wednesday procedure.

FLOOR ACTION

Legislation is placed on the Calendar:

  • House: Bills are placed on one of four House Calendars. They are usually placed on the calendars in the order of which they are reported yet they don't usually come to floor in this order - some bills never reach the floor at all. The Speaker of the House and the Majority Leader decide what will reach the floor and when. (Legislation can also be brought to the floor by a discharge petition.)
  • Senate: Legislation is placed on the Legislative Calendar. There is also an Executive calendar to deal with treaties and nominations. Scheduling of legislation is the job of the Majority Leader. Bills can be brought to the floor whenever a majority of the Senate chooses.

Debate:

  • House: Debate is limited by the rules formulated in the Rules Committee. The Committee of the Whole debates and amends the bill but cannot technically pass it. Debate is guided by the Sponsoring Committee and time is divided equally between proponents and opponents. The Committee decides how much time to allot to each person. Amendments must be germane to the subject of a bill - no riders are allowed. The bill is reported back to the House (to itself) and is voted on. A quorum call is a vote to make sure that there are enough members present (218) to have a final vote. If there is not a quorum, the House will adjourn or will send the Sergeant at Arms out to round up missing members.
  • Senate: debate is unlimited unless cloture is invoked. Members can speak as long as they want and amendments need not be germane - riders are often offered. Entire bills can therefore be offered as amendments to other bills. Unless cloture is invoked, Senators can use a filibuster to defeat a measure by "talking it to death."

Vote:

  • The bill is voted on. If passed, it is then sent to the other chamber unless that chamber already has a similar measure under consideration. If either chamber does not pass the bill then it dies. If the House and Senate pass the same bill then it is sent to the President. If the House and Senate pass different bills they are sent to Conference Committee. Most major legislation goes to a Conference Committee.


CONFERENCE COMMITTEE

  • Members from each house form a conference committee and meet to work out the differences. The committee is usually made up of senior members who are appointed by the presiding officers of the committee that originally dealt with the bill. The representatives from each house work to maintain their version of the bill.
  • If the Conference Committee reaches a compromise, it prepares a written conference report, which is submitted to each chamber.
  • The conference report must be approved by both the House and the Senate.

THE PRESIDENT
The bill is sent to the President for review.

  • A bill becomes law if signed by the President or if not signed within 10 days and Congress is in session.
  • If Congress adjourns before the 10 days and the President has not signed the bill then it does not become law ("Pocket Veto.")
  • If the President vetoes the bill it is sent back to Congress with a note listing his/her reasons. The chamber that originated the legislation can attempt to override the veto by a vote of two-thirds of those present. If the veto of the bill is overridden in both chambers then it becomes law.

THE BILL BECOMES LAW
Once a bill is signed by the President or his veto is overridden by both houses it becomes a law and is assigned an official number.

How a Bill Becomes a Law (2024)

FAQs

How a Bill Becomes a Law? ›

If a bill has passed in both the U.S. House of Representatives and the U.S. Senate and has been approved by the President, or if a presidential veto has been overridden, the bill becomes a law and is enforced by the government.

How a bill can become a law? ›

The bill is sent to the President for review. A bill becomes law if signed by the President or if not signed within 10 days and Congress is in session. If Congress adjourns before the 10 days and the President has not signed the bill then it does not become law ("Pocket Veto.")

How a bill becomes a law lesson one? ›

In order to become law, bills must be approved by both Chambers and the President. Joint resolution: Similar to a bill, joint resolutions originate in either the U.S. House of Representatives or the U.S. Senate, but—opposite of what the name suggests—never jointly in both Chambers.

How does a bill become a law summarize the steps? ›

Description. After both the U.S. House and U.S. Senate have approved a bill in identical form, the bill is sent to the president. If the president approves of the legislation, it is signed and becomes law. If the president takes no action for 10 days while Congress is in session, the bill automatically becomes law.

How does a bill become a law steps essay? ›

There are seven basic steps: Introduction, referral or assignment to house or senate committees, considered in house or senate committees, placement of bill on a legislative calendar, considered on the house or senate floor, signed or vetoed by governor, and lastly the bill does or does not become a law.

How does a bill become a law quizlet simple? ›

After both the House and Senate have approved a bill in identical form, it is sent to the president. If the president approves of the legislation, he signs it and it becomes law.

How does a bill become a law for kids? ›

After the bill has passed in the House, it is sent to the U.S. Senate. The Members of the Senate debate and vote on the bill. If the bill passes, it is sent to the President of the United States for approval. Once the President signs the bill, it is a law.

Why is it so hard for a bill to become a law? ›

The fact that a proposal cannot become a law without consideration and approval by both Houses of Congress is an outstanding virtue of our bicameral legislative system.

Who vetoes bills? ›

The President, however, can influence and shape legislation by a threat of a veto. By threatening a veto, the President can persuade legislators to alter the content of the bill to be more acceptable to the President. Congress can override a veto by passing the act by a two-thirds vote in both the House and the Senate.

What are the 4 main steps in the process of a bill becoming a law in GA? ›

The Life of a Law
  • Step 1: Drafting the Idea. The first step can start with you. ...
  • Step 2: Georgia General Assembly. ...
  • Step 3: Georgia State Legislative Session. ...
  • Step 4: Third Reading. ...
  • Step 5: The Vote. ...
  • Step 6: The Governor's Role. ...
  • Step 7: The Bill Becomes a Law.

What are the two types of bills? ›

Public bills pertain to matters that affect the general public or classes of citizens, while private bills affect just certain individuals and organizations. A private bill provides benefits to specified individuals (including corporate bodies).

How to write a bill for a law? ›

How to Write a Bill
  1. Preamble. This section should provide your rationale for enacting the bill. ...
  2. Body. This section should be separated into sections and subsections. ...
  3. Enactment Clause. ...
  4. Sample Bills and Template. ...
  5. BILL SUBMISSIONS FOR THE 2023 CONFERENCE.

What is the principle of checks and balances? ›

The Checks and Balances system provides each branch of government with individual powers to check the other branches and prevent any one branch from becoming too powerful.

What does article 1 section 7 of the constitution explain? ›

Section 7 Legislation

All Bills for raising Revenue shall originate in the House of Representatives; but the Senate may propose or concur with Amendments as on other Bills.

How to propose a bill to the state? ›

Ideas can come from anyone. The process begins when someone persuades a Senator or Assembly member to author a bill. A legislator sends the idea and the language for the bill to the Legislative Counsel where it is drafted into the actual bill. The drafted bill is returned to the legislator for introduction.

What are four sources of ideas for bills? ›

Ideas for bills can come from many sources like US citizens, organized groups, congressional committees, members of congress and the president. When large numbers of citizens/groups request a law Congress usually listens.

How does a bill become a law Wikipedia? ›

Once a bill is approved by one house, it is sent to the other, which may pass, reject, or amend it. For the bill to become law, both houses must agree to identical versions of the bill.

Top Articles
Latest Posts
Article information

Author: Lakeisha Bayer VM

Last Updated:

Views: 5988

Rating: 4.9 / 5 (69 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Lakeisha Bayer VM

Birthday: 1997-10-17

Address: Suite 835 34136 Adrian Mountains, Floydton, UT 81036

Phone: +3571527672278

Job: Manufacturing Agent

Hobby: Skimboarding, Photography, Roller skating, Knife making, Paintball, Embroidery, Gunsmithing

Introduction: My name is Lakeisha Bayer VM, I am a brainy, kind, enchanting, healthy, lovely, clean, witty person who loves writing and wants to share my knowledge and understanding with you.